iPhysicalTherapy.com – Call us: 866-782-6258

Wheelchair Positioning for the Bariatric Patient

Kirsten Davin, OTD, OTR/L, ATP, SMS

August 2, 2012

Question

What is the optimal wheelchair positioning for obese individuals with a majority of their weight around their hips?  Are there specific positioning techniques to utilize so that they can assist with pushing the wheelchair?

Answer

In terms of obesity, keep in mind that a lot of times you will have clients with a notable gluteal shelf.  By that, I am referring to the fact that when you look at the client laterally, you would see the client's back and then, as their back continues down towards the buttocks, there is excess tissue on the actual buttocks area.  A lot of times, if you were to look at an individual, you may actually have four, five or six inches of tissue behind the actual back of the person that you have to accommodate for.  There’s one thing you can do.  If we go back to our sacrum to popliteal fossa measurement (our upper leg length measurement) you can actually take two measurements instead.  First, you take one measurement from the back of the knee all the way to the farthest point, so as to include that rear end in the actual measurement.  Then, you’re going to take a measurement from where the client’s back is before the rear end starts, so roughly right above that iliac crest, and measure out to where the back of the knee would be.  Now, don’t angle down to the back of the knee, but measure out parallel to the first measurement to where that back of the knee would fall.  So, you essentially have two different measurements, one of which is from where the back of the knee would be to the patient's actual back, and the other one is from the back of the knee to the back of the rear end.  You’ll take those two measurements, and that will tell you how much extra tissue you must accommodate for. 

Now, there is an option that you can get for a wheelchair called a gluteal table.  It will actually mount onto the back of the wheelchair frame. What that will do is allow that client to have that tissue rest on that gluteal table if you incorporate a wheelchair back, that leaves the lumbar portion of the back open and supports them in the upper lumbar to thoracic region of the actual back. This will allow that individual to recess into the chair a little bit more, which will give them better positioning in terms of where their upper extremities are in conjunction with the drive wheels.  This will also give them a better center of gravity.  

Continued and its subsidiaries provide professional education authored by qualified Subject Matter Experts for continuing education purposes. These materials are intended for educational purposes and do not constitute medical advice or a substitute for individual clinical judgment. Continued is not a clinical healthcare provider; the licensed professional is solely responsible for ensuring that the application of any techniques or information presented is within their legal scope of practice and jurisdictional requirements.


kirsten davin

Kirsten Davin, OTD, OTR/L, ATP, SMS

DR. KIRSTEN DAVIN, OTD, OTR/L, ATP, SMS is best known for her long running seminar, Let’s Roll!  The Art of Performing Seating and Mobility Evaluations.  She is a licensed Occupational Therapist, certified Assistive Technology Professional (ATP) and Seating and Mobility Specialist (SMS), with extensive experience in a variety of practice areas including inpatient, acute care and intensive care units, as well as the Central Illinois Regional Burn Center.  She is the owner of a successful home health-based private practice, Escape Mobility Solutions, LLC, which is dedicated to evaluating individuals for custom forms of assistive technology, such as power and manual wheelchairs, seating and positioning systems, and augmentative and alternative communication.  She regularly conducts workshops on a national basis, regarding seating/positioning and assistive technology, and prides herself in offering entertaining and engaging seminars, and make learning fun.  Dr.Davin completed her undergrad studies in occupational therapy, and graduated Summa Cum Laude from the University of Illinois at Chicago in 2001.  She received her Doctorate in Occupational Therapy in 2007, from Rocky Mountain University of Health Professions in Provo, Utah, where she now holds a faculty position. 

 


Related Courses

Successful Static Splinting: Foundations, Part 1
Presented by Kirsten Davin, OTD, OTR/L, ATP, SMS
Recorded Webinar

Presenter

Kirsten Davin, OTD, OTR/L, ATP, SMS
Course: #4017Level: Introductory1 Hour
  'Ib will reach out to the OT'   Read Reviews
Following a brief overview of the history of splint fabrication and the advances in the splinting and orthotics arena, an anatomical review of hand structures and landmarks will be performed. Types of splints as well as the variety in thermoplastic materials and characteristics will be presented in preparation for additional courses within this series. This course is Part 1 of a 4-part series on static splinting.

Please note: This course is also offered in a series of recordings titled "Static Splinting Series" course 4063, which is offered for 4 CEUs.

Successful Static Splinting: Forearm Based Splint Fabrication, Part 2
Presented by Kirsten Davin, OTD, OTR/L, ATP, SMS
Recorded Webinar

Presenter

Kirsten Davin, OTD, OTR/L, ATP, SMS
Course: #4019Level: Intermediate1 Hour
  'Good information for novice splint makers'   Read Reviews
In this course, types of pre-cut, pre-formed and sheet-based splint fabrication techniques are explored as well as a comparison between volar and dorsal-based approaches. A detailed demonstration of four types of forearm-based wrist orthotics are presented, including radial gutter/thumb spica splints, dorsal and volar wrist cock-ups, and functional position with an intrinsic plus modification option. This course is Part 2 of a 4-part series on static splinting. This course is directly related to the practice of physical therapy and is therefore appropriate for the PT/PTA.

Please note: This course is also offered in a series of recordings titled "Static Splinting Series" course 4063, which is offered for 4 CEUs.

Successful Static Splinting: Hand Based Splint Fabrication, Part 3
Presented by Kirsten Davin, OTD, OTR/L, ATP, SMS
Recorded Webinar

Presenter

Kirsten Davin, OTD, OTR/L, ATP, SMS
Course: #4021Level: Intermediate1 Hour
  'Helpful, applicable with good visual'   Read Reviews
Types of pre-cut, pre-formed and sheet-based splint fabrication techniques are explored as well as video demonstration of the fabrication of a hand-based thumb spica, finger gutter and MP joint blocking splints. In addition, the application and use of a spring finger extension splint, oval 8 splints as well as static progressive finger flexion and extension splints are discussed. This course is directly related to the practice of physical therapy and is therefore appropriate for the PT/PTA.

Please note: This course is also offered in a series of recordings titled "Static Splinting Series" course 4063, which is offered for 4 CEUs.

Successful Static Splinting: Fabrication for Specific Diagnoses, Part 4
Presented by Kirsten Davin, OTD, OTR/L, ATP, SMS
Recorded Webinar

Presenter

Kirsten Davin, OTD, OTR/L, ATP, SMS
Course: #4023Level: Intermediate1 Hour
  'explanations were good'   Read Reviews
Types of pre-cut, pre-formed and sheet-based splint fabrication techniques are explored as well as instruction on the fabrication of a foot plate for external fixator application, the application of lower extremity splints and orthotics as well as splinting considerations for specific diagnoses including burn injury. A focus on creative splinting techniques is emphasized. This course is directly related to the practice of physical therapy and is therefore appropriate for the PT/PTA.

Please note: This course is also offered in a series of recordings titled "Static Splinting Series" course 4063, which is offered for 4 CEUs.

Dynamic Splinting: Building the Foundation for Success, Part 1
Presented by Kirsten Davin, OTD, OTR/L, ATP, SMS
Recorded Webinar

Presenter

Kirsten Davin, OTD, OTR/L, ATP, SMS
Course: #4025Level: Intermediate1 Hour
  'Foundational, but it’s a shame that it was only targeting UEs; hinged AFOs etc are dynamic also'   Read Reviews
Following a brief anatomical review of hand structures in order to ensure understanding of the theory, purpose, and methods behind many dynamic splint designs, Dr. Davin offers a comparison of the qualities of static splinting as compared to dynamic splinting. An overview of various dynamic splinting options is introduced and serves to build foundational knowledge as it relates to dynamic splinting in preparation for upcoming courses within this series.

Please note: This course is also offered in a series of recordings titled "Dynamic Splinting Series: Splinting for Elbow and Wrist Function" course 4057, which is offered for 4 CEUs.